Bamboo-copter - quad à partir de bâtons et de cure-dents

Répondre
Avatar de l’utilisateur
Arthor
Messages : 3
Inscription : 08 juin 2016, 14:58

Bamboo-copter - quad à partir de bâtons et de cure-dents

Message non lu par Arthor » 10 juin 2016, 14:57

Bonjour,
Welcome,
This is my first post, so I will introduce myself. My name is Michal, since few months I live in Lodeve and for 2 years I fly with quadcopters.
Recently I have finished building my new frame, completely made of bamboo bbq-sticks and toothpicks.
Frame size: 500mm,
Frame weight 285g (325g with legs),
FC: KK 2.15,
Motors: Turnigy Multistar Elite 2810/750Kv,
ESC: Turnigy 30A Opto,
BEC 3A,
Battery: Turnigy 5000mAh 3S 25/35C
Radio: Turnigy 9X with stock link 2.4GHz (I plan to change the link to eLeReS MAX 433MHz 12ch with telemetry),
Gimbal: Walkera G-2D w/GoPro Hero 4 Black,
FPV:
Camera RunCam CCD 600TVL;
Video Tx: Boscam 5.8GHz 200mW,
Video Rx SkyZone 700D monitor with divercity and DVR;
Antennas: Clover Mushrooms by Kkacper

Total weight: 1670g;
Flight time > 15 min.
Image

http://i.imgur.com/57HSkio.jpg
http://i.imgur.com/yU3EYMS.jpg
http://i.imgur.com/zifdt3A.jpg
http://i.imgur.com/L2gCqRV.jpg
http://i.imgur.com/NaBb63P.jpg
http://i.imgur.com/FT2qakf.jpg
http://i.imgur.com/wmJMf7z.jpg
http://i.imgur.com/gm1Go2R.jpg
http://i.imgur.com/xhAf5Zc.jpg
http://i.imgur.com/bow1r5d.jpg
http://i.imgur.com/XJcldwH.jpg
http://i.imgur.com/UnrR6aw.jpg
http://i.imgur.com/ngOAhOf.jpg
http://i.imgur.com/PZW52ew.jpg
http://i.imgur.com/qc4xsIq.jpg
http://i.imgur.com/uWVDh6c.jpg
http://i.imgur.com/EqQJ6LC.jpg
http://i.imgur.com/PPneAC5.jpg
http://i.imgur.com/sW3XHTV.jpg
http://i.imgur.com/jswbH2n.jpg
http://i.imgur.com/HKzzeHO.jpg
http://i.imgur.com/rXqlZkC.jpg
http://i.imgur.com/wmP9b3P.jpg
http://i.imgur.com/TOFDjnd.jpg

I also have two questions:
What is the weight limit for flying without licence? (it is 1,5kg or 2kg, right?)
What frequencies are legal in France? 2,4GHz for RC link and 5,8GHz for video are legal for sure. But what about long-range frequencies? 433MHz for RC and 1,2GHz for video? I don't speak french very well so it's very hard for me to find any informations.

Avatar de l’utilisateur
jean
Administrateur du site
Messages : 3717
Inscription : 31 déc. 2011, 17:11
Localisation : Brignac

Re: Bamboo-copter - quad à partir de bâtons et de cure-dents

Message non lu par jean » 10 juin 2016, 15:07

Hello,

you are welcome. I think Laurent will be able to answer you.

Sunday we have our club day at the track of Mas. Do not hesitate to visit us.

By
jean
--
Ground control to Major Tom
Commencing countdown, engines on
http://modelesrc.blogspot.fr/

Avatar de l’utilisateur
laurent-b
Messages : 336
Inscription : 20 août 2014, 08:35
Localisation : Saint André de Sangonis

Re: Bamboo-copter - quad à partir de bâtons et de cure-dents

Message non lu par laurent-b » 11 juin 2016, 13:06

Hello Michal.
En France la règlementation n'autorise que:
5.8 ghz pour la video et en 25mw maxi
2.4 ghz pour les emmissions radio (le 433 pour le long range n'est pas autorisé)
et en ce qui concerne le poids maxi il me semble qu'il ne doit pas être supérieur a 2 kg
Au plaisir de vous rencontrer
Laurent
Le plaisir avant tout....

Répondre

Revenir à « NOS MODELES »